1-415-230-4353

Brocade LS Series Switches

 

Brocade's FastIron LS Series are compact high performance networking switches that support 20 or 44 10/100/1000 Mbps RJ45 ports plus 4 combo copper/fiber Gigabit Ethernet ports supporting 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity.

In addition, the FastIron LS Series switches support optional field-upgradeable 10GbE modules for cost-effective solution for 10/100/1000 Mbps network access and the flexibility to support 10-GE. The 24 port models support up to three 10GbE ports while the 48 port models support up to two 10GbE ports.

The FastIron LS series can be field-upgraded to support IronStack, Brocades’s stacking solution. With IronStack, up to 8 FastIron LS series switches can be stacked together operating as a single logical chassis.

The FastIron LS Series switches deliver advanced Layer 2, Base Layer 3 and Edge Layer 3 (EdgePREM) features based on the company’s field-proven IronWare networking software. Base Layer 3 features include IPv4 static routes, RIP route advertisement, VRRP, virtual and routed interfaces, ECMP and DHCP relay. EdgePREM software includes IPv4 routing features such as OSFP and RIPv1/v2 in addition to features supported in Base Layer 3. The EdgePREM software can either be pre-installed or can be upgraded in the field via the EdgePREM upgrade kit.

Pluggable 10-GE modules, XFP and SFP transceivers and additional CX4 cables are optional and must be purchased separately.

Part Number Description

FastIron LS field installable 1-port XFP 10 Gigabit Ethernet module. Applicable only for the FastIron LS 624 and the FastIron LS 648.

FastIron LS field installable 1-port CX4 10 Gigabit Ethernet module. Module includes integral CX4 Transceiver for 10-GbE operation over 15 meters copper CX4 cable. Unit ships with .5 meter CX4 cable. This module is only supported on the FastIron LS 624 and LS 648 switches.

The FastIron LS 624 supports twenty-four 10/100/1000 Mbps RJ-45 Ethernet ports. Four ports are implemented as combination RJ45-SFP ports in which the port may be used as either a copper 10/100/1000 Mbps Ethernet or as a fiber 100/1000 Mbps when using an SFP Transceiver in the corresponding SFP port. The FastIron LS 624 includes three 10-Gigabit Ethernet slots each configurable with a single-port XFP-based 10-Gigabit Ethernet module (part # FLS-1XG).

FastIron LS 624-EPREM includes 20 x 10/100/1000 Mbps ports plus 4 Combo copper/fiber Gigabit Ethernet ports supporting 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity. The switch ships with EdgePREM IronWare software upgrade

FastIron LS 624-STK includes 20-port 10/100/1000 plus 4-port Combo copper/fiber Gigabit Ethernet ports for use with 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity. This switch also includes one open slot for an optional 1-port 10-GE module. The unit comes with factory installed two CX4 modules, stacking EEPROM and 256 MB of CPU memory. Unit ships with one 0.5m CX4 cable and a CD that includes stacking software, installation and configuration guides.

FastIron LS624-STK-CXU Upgrade kit includes two 10GbE CX4 modules,__ 256 MB memory (memory upgrade),EEPROM (to enable stacking),one 0.5m CX4 cable upgrade kit installation guide and a CD that includes stacking software, installation and configuration guides.

FastIron LS624-STK-U Upgrade kit includes 256 MB memory (memory upgrade)_, EEPROM (to enable stacking) upgrade kit installation guide and a CD that includes stacking software, installation and configuration guides.

The FastIron LS 648 supports forty-eight 10/100/1000 Mbps RJ-45 Ethernet ports. Four ports are implemented as combination RJ45-SFP ports in which the port may be used as either a copper 10/100/1000 Mbps Ethernet or as a fiber 100/1000 Mbps when using an SFP Transceiver in the corresponding SFP port. The FastIron LS 648 includes two 10-Gigabit Ethernet slots each configurable with a single-port XFP-based 10-Gigabit Ethernet module (part # FLS-1XG).

FastIron LS 648-EPREM includes 44 x 10/100/1000 Mbps ports plus 4 Combo copper/fiber Gigabit Ethernet ports supporting 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity. The switch ships with EdgePREM IronWare software upgrade

FastIron LS 648-STK includes 44-port 10/100/1000 plus 4-port Combo copper/fiber Gigabit Ethernet ports for use with 10/100/1000 Mbps (RJ45) or 100/1000 Mbps Ethernet Fiber (SFP) connectivity. The unit comes with factory installed two CX4 modules, stacking EEPROM and 256 MB of CPU memory. Unit ships with one 0.5m CX4 cable and a CD that includes stacking software, installation and configuration guides.

FastIron LS648-STK-CXU upgrade kit includes two 10GbE CX4 modules,__ 256 MB memory (memory upgrade),EEPROM (to enable stacking),One 0.5m CX4 cable upgrade kit installation guide and a CD that includes stacking software, installation and configuration guides.

FastIron LS648-STK-U Upgrade kit includes 256 MB memory (memory upgrade)_ , EEPROM (to enable stacking), upgrade kit installation guide and a CD that includes stacking software, installation and configuration guides.

Terabit systems advantage

Industry leading Customer Service
Cost Recovery Specialists
Bullet Proof Warranty

Terabit Systems is more than a supplier of top-quality networking hardware. We are a customer-centered business that strives to provide you the best, hassle-free customer service in the network hardware industry. It’s simple, you have enough going on managing your day to day network operations. The experience of buying hardware should not be something you dread. You will enjoy working with our San Francisco-based Networking Specialists and look at buying networking hardware in a whole new light.

In addition to the savings you receive buying refurbished equipment, we also help extend your budget with our asset recovery/hardware re-marketing services. If you have surplus gear or are switching platforms, we can help lower your total cost of ownership by buying your unused or used networking equipment and offering fair-market value or trade-in on your new networking equipment. Give us a call to set up a free audit of your gear.

We make purchasing networking hardware simple for you. If anything goes wrong within the first year, we will replace it or offer a full refund. Simple enough? Our rigorous testing procedures allow us to certify our equipment with rock solid warranties. Our tight shipping process ensures it arrives safely – on time.

Our team

Better service. Complete solutions. Real people. That’s what sets us apart.

Charles
Solution Specialist

We are way more than simply moving part numbers.

Rozanna
Sales Associate

With Terabit it’s not about price. It’s about balancing clients’ needs with how much they can afford and guiding them to the solution.

Charles
Solution Specialist

It still has that new card smell.

Joe
Marketing Manager

Nothing feels better than being the hero who can ship a piece of gear the same day and keep a network running.

Daniel
Account Executive

Used does not mean less capable. As soon as gear is plugged in it becomes “used”, much like a brand new car driving off the lot.

Brian
General Manager

If you’re happy, we’re happy. If not, call us and we’ll make it right.

Raul
Senior Sales Associate

When the fans kick on 100% and traffic is flowing through the ports, I get a kind of rush.

Dave
Technical Director

BLOG

October 02, 2017

Juniper’s MX Series BASE, PREMIUM, PREMIUM2, and PREMIUM3: What’s the Difference?

Climbing the Juniper MX Series Mountain

 

We’re often asked “What are the differences among...