1-415-230-4353

TX Matrix Plus

Part Number Description

Control Board for TX Matrix Plus, Base Bundle

Control Board for TX Matrix Plus, Spare

Cable manger assembly for rear trunk fibers. Attaches to the LCCs that are part of to a TX Matrix Plus routing node.

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 4 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 6 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 8 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 10 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 12 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 15 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 20 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 25 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 30 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 35 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 40 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 45 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 50 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 55 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 60 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 65 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 70 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 75 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 80 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 85 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 90 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 95 meters

(1) fiber array cable to interconnect SIB-TXP-T1600 to SIB-TXP-F13, 100 meters

Compact Flash, 4G for RE, Spare

TX Matrix Plus Chassis with Installed Backplane, Spare

Connector Interface Panel for TX Matrix Plus, Base Bundle

Craft Interface Panel for TX Matrix Plus, Spare

Front Display Panel for TX Matrix Plus, Spare

Front Fan Tray for TX Matrix Plus, Spare

Rear Fan Tray for TX Matrix Plus, Spare

(1) Air Filter for TX Matrix Plus, Horizontal, Spare

(2) Air Filters for TX Matrix Plus, Vertical, Spare

Loopback Plug for TX Matrix Plus bulkhead, Spare

Loopback Plug for TX Matrix Plus cable end adapter, Spare

(1) Shipping packaging for TX Matrix Plus, Spare

Slide Out Tray for Power Connections, TX Matrix Plus PEM, Spare

7 x 60 Amp DC Power Entry module for TX Matrix Plus, Spare

Routing engine with dual core 2600MHz processor, SSD and 16GB memory, Base Bundle

Routing engine with dual core 2600MHz processor, SSD and 16GB memory, Redundant

Routing engine with dual core 2600MHz processor, SSD and 16GB memory, Spare

Routing engine with dual core 2600MHz processor, SSD and 16GB memory, Spare

Switch Interface Board for TX Matrix Plus, fabric stages one and three

Switch Interface Board for TX Matrix Plus, fabric stages one and three, Spare

Switch Interface Board for TX Matrix Plus, fabric stage two

Switch Interface Board for TX Matrix Plus, fabric stage two, Spare

Solid State Drive, 64G for RE, Spare

Blank plate for TX Matrix Plus fabric stage one, three slot, Spare

TX Matrix Plus installation toolkit includes loopbacks and fiber cleaning supplies

TX Matrix Plus Base Chassis fully redundant, includes 2 Res, 2 CBs, 2 CIPs

USB Memory, 4G for RE, Spare

BLOG

February 15, 2017
Arista DCS-7150S-52 uses an Oven-Controlled Crystal Oscillator OXCO

What makes solid performing hardware? You’d be correct in guessing that it might start with solid hardware. When Arista mentioned in their whitepaper* that the 7150S included an onboard high precision “Oven-Controlled Crystal Oscillator” (OXCO), I was compelled to find out what...