FastIron SuperX/SX Family Chassis and Bundles
FastIron SuperX/SX family of layer 2/3 swiches includes the FastIron SuperX, FastIron SX 800, FastIron SX 1600 modular systems. These products enable customers to deploy a VoIP-ready infastructure featuring scalable and resilent Power over Ethernet switching and a rich feature set to secure and simplify network convergence from edge to core. Advanced IronWare software featuring Full Layer 3 IPv4 or IPv6 routing is available as a pre-configured option at the time of purchase (-PREM models) or may be purchased separately for a field upgrade. The FastIron SuperX/SX products are available in IPv4 and IPv6-Capable hardware configurations. The IPv6-capable models are hardware ready to support IPv6 routing. Actual IPv6 routing operation will require the purchase of an IPv6 routing upgrade. All FastIron SuperX/SX products support Layer 2 switching of IPv4 and IPv6 traffic and Layer 3 routing of IPv4 and IPv6 traffic with appropriate software upgrade.
Some older SFP modules have latching mechanism which are larger than the newer parts. These latches could interfere with one another when inserted side by side into a SuperX module. Avoid using these SFPs side by side in the same module. These older modules are identified by the number PL-XPL-00-S13-22 or PL-XPL-00-L13-23 above the Serial Number. The newer SFPs which do not have this limitation have a number starting with SL4114A below the bar code.
Note:1 These chassis models may be configured with either all IPv4 modules or all IPv6-ready modules (i.e., line modules and management modules) These products are capable of Layer 2 switching of IPv4 and IPv6 traffic and Layer 3 routing of IPv4 traffic. If the application requires IPv6 Layer 3 operation please refer to the FastIron SuperX/SX models that are identified as hardware ready for IPv6 Layer 3 routing.
| Part Number | Description | MSRP |
|---|---|---|
| FI-SX1-AC See Note 1 | FastIron SuperX Chassis with Fan tray and one (1) AC Power Supply. Equivalent to FI-SX1-4-AC. | Call |
| FI-SX1-DC See Note 1 | FastIron SuperX Chassis with Fan tray and one (1) DC Power Supply. Equivalent to FI-SX1-4-DC. | Call |
| FI-SX800-AC See Note 1 | FastIron SX 800 chassis bundle includes one SX 800 8-slot chassis (FI-SX800-S), two Switch Fabric module (SX-FISF), one system power supply (SX-ACPWR-SYS), nine interface panels (SX-FI-IFPNL), three power supply panels (SX-PWR-PNL), and one fan tray (SX-SX800-FAN). This chassis may be configured with IPv4 or IPv6-ready management and line modules. | Call |
| FI-SX1600-AC See Note 1 | FastIron SX 1600 chassis bundle includes one SX 1600 16-slot chassis (FI-SX1600-S), two Switch Fabric Module (SX-FISF), two system power supply (SX-ACPWR-SYS), seventeen interface cover panels (SX-FI-IFPNL), six power supply cover panels (SX-PWR-PNL), one SX 1600 filter (SX-SX1600-FILTER), and two fan trays that includes fans (SX-SX1600-FAN). | Call |
| FI-SX800-DC See Note 1 | FastIron SX 800 chassis bundle includes one SX 800 8-slot chassis (FI-SX800-S), two Switch Fabric module (SX-FISF), one system power supply (SX-DCPWR-SYS), nine interface panels (SX-FI-IFPNL), three power supply panels (SX-PWR-PNL), and one fan tray (SX-SX800-FAN). | Call |
| FI-SX800-1SF-AC See Note 1 | FastIron SX 800 chassis bundle, which includes 1 AC power supply and 1 switch fabric. | Call |
| FI-SX1600-DC See Note 1 | FastIron SX 1600 chassis bundle includes one SX 1600 16-slot chassis (FI-SX1600-S), two Switch Fabric Module (SX-FISF), two system power supply (SX-DCPWR-SYS), seventeen interface cover panels (SX-FI-IFPNL), six power supply cover panels (SX-PWR-PNL), one SX 1600 filter (SX-SX1600-FILTER), and two fan trays that includes fans (SX-SX1600-FAN). | Call |
| FI-SX1600-1SF-AC See Note 1 | FastIron SX 1600 chassis bundle, which includes 2 AC system power supply and 1 switch fabric. | Call |
FastIron SuperX/SX Family Management Modules (IPv4) and L3 IPv4 Upgrade
Note 3: With the exception of the SX-FIZMR, the following management modules are not IPv6-ready and may only be used in systems configured with IPv4 line modules. The SX-FIZMR and may be configured in systems with all IPv4 line modules or all IPv6 ready line modules.
These products are capable of Layer 2 switching of IPv4 and IPv6 traffic and Layer 3 routing of IPv4 traffic. If the application requires IPv6 Layer 3 operation please refer to the FastIron SuperX/SX models that are identified as hardware ready for IPv6 Layer 3 routing.
| Part Number | Description | MSRP |
|---|---|---|
| SX-FI12GM-4 See Note 3 | FastIron SuperX Management module features 12 combo copper / fiber Gigabit Ethernet ports (10/100/1000 Mbps (RJ45) or Gigabit Ethernet Fiber (SFP) connectivity per port), 400 MHz processor and 256 MB SDRAM. Software includes advanced Layer 2 and Base Layer 3 IPv4 services (static routes and RIP advertisement). This management module may only be used in systems configured with all IPv4 line modules. | Call |
| SX-FI12GM-4-PREM See Note 3 | FastIron SuperX Management module features 12 combo copper / fiber Gigabit Ethernet ports (10/100/1000 Mbps (RJ45) or Gigabit Ethernet Fiber (SFP) connectivity per port), 400 MHz processor and 256 MB SDRAM. Software includes advanced Layer 2 and full Layer 3 IPv4 services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM-SM and PIM-DM). This management module may only be used in systems configured with all IPv4 line modules. | Call |
| SX-FIZMR See Note 3 | Management module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port and one serial console port. There are no user traffic ports supported on this module. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer 2 and Base Layer 3 IPv4 services (static routes and RIP advertisement). This management module may be used in systems configured with all IPv4 line modules or all IPv6-ready line modules. | Call |
| SX-FIZMR-PREM See Note 3 | Management Module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port and one serial console port. There are no user traffic ports supported on this module. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer2, Base Layer3 Services (static routes and RIP advertisement) or Full Layer3 IPv4 Services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM-SM and PIM-DM). This management module may only be used in systems configured with all IPv4 line modules. | Call |
| SX-FI2XGMR4 | Management module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port, one serial console port and two 10-Gigabit Ethernet ports for user traffic. The 10-GE ports support pluggable XFP transceivers. These transceivers must be purchased separately. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer 2 and Base Layer 3 IPv4 services (static routes and RIP advertisement). This management module may only be used in systems configured with all IPv4 line modules. | Call |
| SX-FI8GMR4 See Note 3 | 8-port GbE IPv4 Management Module for the FastIron SX 800 and SX 1600 chassis. This IPv4 management module includes one Ethernet management port, one serial console port, 4-port GbE copper and 4-port GbE SFP (transceiver not included) for user traffic. Module ships with IronWare Advanced Layer2 and Base Layer3 software. This module may only be used in a system configured with IPv4 management and line modules. | Call |
| SX-FI8GMR4-PREM See Note 3 | 8-port GbE IPv4 Management Module for the FastIron SX 800 and SX 1600 chassis. This IPv4 management module includes one Ethernet management port, one serial console port, 4-port GbE copper and 4-port GbE SFP (transceiver not included) for user traffic. Module ships with Premium IronWare Full L3 IPv4 service set. This module may only be used in a system configured with IPv4 management and line modules. | Call |
FastIron SuperX/SX Family Management Modules (hardware ready for IPv6 routing upgrade) and Full L3 Upgrades
| Part Number | Description | MSRP |
|---|---|---|
| SX-FI12GM-6 See Note 4 | FastIron SuperX Management module features 12 combo 10/100/1000 Mbps (RJ45) / SFP Gigabit Ethernet ports, 400 MHz processor and 256 MB SDRAM. Software includes advanced Layer 2 and Base Layer 3 IPv4 services (static routes and RIP advertisement). This module may be upgraded with Full L3 Ironware Software (IPv4 or IPv4/IPv6). This management module may only be used in systems configured with all IPv6-ready line modules. | Call |
| SX-FI12GM-6-PREM See Note 4 | IPv6-Capable FastIron SuperX Management Module includes 12 combo 10/100/1000 Mbps (RJ45) / SFP Gigabit Ethernet ports (transceivers not included), 400 MHz processor and 256 MB SDRAM. Software includes advanced Layer 2 and Full Layer 3 IPv4 services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM). This module may be upgraded with Full L3 IPv4 & IPv6 Ironware Software. This management module may only be used in systems configured with all IPv6-ready line modules. | Call |
| SX-FI8GMR6 See Note 4 | 8-port GbE Management module with Base L3 IPv4 for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port, one serial console port, 4-port GbE copper and 4-port GbE SFP for user traffic. The GbE ports support pluggable SFP transceivers. These transceivers must be purchased separately. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer 2 and Base Layer 3 IPv4 services (static routes and RIP advertisement). This module may be upgraded with Full L3 Ironware Software (IPv4 or IPv4/IPv6). This management module may only be used in systems configured with all IPv6-ready line modules. | Call |
| SX-FI8GMR6-PREM See Note 4 | IPv6-Capable 8-port GbE Management module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port, one serial console port, 4port GbE copper and 4-port GbE SFP for user traffic. The GbE ports support pluggable SFP transceivers. These transceivers must be purchased separately. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer 2 and Full Layer 3 IPv4 services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM). This module may be upgraded with Full L3 IPv4 & IPv6 Ironware Software. This management module may only be used in systems configured with all IPv6-ready line modules. | Call |
| SX-FI2XGMR6-PREM | IPv6-Capable 2-port 10GbE Management module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port, one serial console port and two 10-Gigabit Ethernet XFP ports (10GbE) for user traffic. These transceivers must be purchased separately. To configure 1:1 management module redundancy, two of the same type of management modules must be installed in the chassis. The loaded software image supports advanced Layer 2 and Full Layer 3 IPv4 services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM-SM and PIM-DM). This module may be upgraded with Full L3 IPv4 & IPv6 Ironware Software. This management module may only be used in systems configured with all IPv6-ready line modules. | Call |
| SX-FI12GM-6-PREM6 | IPv6-Capable FastIron SuperX Management Module includes 12 combo 10/100/1000 Mbps (RJ45) / SFP Gigabit Ethernet ports (transceivers not included), 400 MHz processor and 256 MB SDRAM. Module ships with Premium IronWare software including Full L3 IPv4+IPv6 service sets (BGP-4, OSPF/OSPFv3, RIP/RIPng, VRRP/VRRPE, DVMRP, PIM, IPv4/IPv6 static routes, 6-to-4 static tunneling). The module can only be used in a system configured with all IPv6-ready modules. | Call |
| SX-FIZMR-6-PREM6 | IPv6-Capable Zero-Port Management Module for the FastIron SX 800 and SX 1600 chassis. This management module includes 1 Ethernet management port and 1 serial console port. There are no user traffic ports supported on this module. To configure redundancy, two of the same type of management modules must be installed in the chassis. Module ships with Premium IronWare software including Full L3 IPv4+IPv6 service sets (BGP-4, OSPF/OSPFv3, RIP/RIPng, VRRP/VRRPE, DVMRP, PIM, IPv4/IPv6 static routes, 6-to-4 static tunneling). The module can only be used in systems configured with all IPv6-ready line modules. | Call |
| SX-FI8GMR6-PREM6 | IPv6-Capable 8 port GbE Management Module for the FastIron SX 800 and SX 1600 chassis. This management module includes one Ethernet management port, one serial console port, 4port GbE copper and 4-port GbE SFP (transceiver not included) for user traffic. Module ships with Premium IronWare software including Full L3 IPv4+IPv6 service sets. The module can only be used in a system configured with all IPv6-ready line modules. | Call |
| SX-FI2XGMR6-PREM6 | IPv6-Capable 2-port 10GbE Management Module for the FastIron SX 800 and SX 1600 chassis. This management module includes 1 Ethernet management port, one serial console port and 2 10GbE ports for user traffic. The 10GbE ports support pluggable XFP transceivers (transceivers not included). Module ships with Premium IronWare software including Full L3 IPv4+IPv6 service sets (BGP-4, OSPF/OSPFv3, RIP/RIPng, VRRP/VRRPE, DVMRP, PIM, IPv4/IPv6 static routes, 6-to-4 static tunneling). The module can only be used in a system configured with all IPv6-ready line modules. | Call |
| SX-FIZMR-6-PREM | IPv6-Capable Zero-Port Management Module for the FastIron SX 800 and SX 1600 chassis. This management module includes 1 Ethernet management port and 1 serial console port. There are no user traffic ports supported on this module. To configure redundancy, two of the same type of management modules must be installed in the chassis. Module ships with Premium IronWare software including Full L3 IPv4 service set (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM) and can be upgraded with Full L3 IPv4 & IPv6 Ironware Software. The module can only be used in systems configured with all IPv6-ready line modules. | Call |
FastIron SuperX/SX Family Line Modules (IPv4) and POE Upgrade Module
These products are capable of Layer 2 switching of IPv4 and IPv6 traffic and Layer 3 routing of IPv4 traffic. If the application will require IPv6 Layer 3 routing in the future please refer to the FastIron SuperX/SX models that are identified as hardware ready for IPv6 Layer 3 routing.
| Part Number | Description | MSRP |
|---|---|---|
| SX-FI424100FX | 24-port 100FX bundle, which includes SX-FI424HF and 24 E1MG-100FX optics for fiber to the desktop applications. | Call |
| SX-FI42XG-BNDL-2CX4 | 2-port CX4 FastIron SuperX module bundle. Includes one SX-FI2XG and two 10G-XFP-CX4. | Call |
| SX-FI424C | 24-port 10/100/1000 Mbps (RJ-45) Ethernet module for FastIron SuperX family | Call |
| SX-FI424P | 24-port 10/100/1000 Mbps (RJ-45) Ethernet with POE installed module for FastIron SuperX family | Call |
| SX-FI424F | 24-port SFP-based Gigabit Fiber Ethernet module for FastIron SuperX family | Call |
| SX-FI424HF | 24-port 100/1000 Mbps SFP-based Fiber Ethernet module for FastIron SuperX family | Call |
| SX-FI42XG | 2-port XFP 10 Gigabit Ethernet module for FastIron SuperX family | Call |
| SX-24GCPOE | POE Add-in Card for 24-port 10/100/1000 Mbps (RJ-45) modules (Sales Model # SX-FI424C or SX-FI624C) | Call |
FastIron SuperX/SX Family Line Modules (hardware ready for IPv6 upgrade option) and POE Upgrade Module
Note: These line modules may only be used in combination with other IPv6 ready line modules and IPv6 ready management modules. 10G-XFP-ZRD-1543-73 10GBASE-ZR DWDM, XFP optic, 80km, 1543.73 nm, Channel 42, LC connector
| Part Number | Description | MSRP |
|---|---|---|
| SX-FI624C | 24-port 10/100/1000 Gigabit Ethernet module for FastIron SuperX family. | Call |
| SX-FI624P | 24-port 10/100/1000 Gigabit Ethernet with POE installed IPv6 module for FastIron SuperX family. | Call |
| SX-FI624HF | 24-port 100/1000 SFP based Fiber Ethernet IPv6 module for FastIron SuperX family. | Call |
| SX-FI62XG | 2-port XFP 10 Gigabit Ethernet module for FastIron SuperX family. | Call |
| SX-FI624100FX | 24-port 100FX bundle, which includes SX-FI624HF and 24 E1MG-100FX optics for fiber to the desktop applications. | Call |
| SX-24GCPOE | POE Add-in Card for 24-port 10/100/1000 modules (Sales Model # SX-FI424C or SX-FI624C) | Call |
FastIron SuperX/SX Family Power Supply
| Part Number | Description | MSRP |
|---|---|---|
| SX-ACPWR-SYS | 90-240 VAC power supply for the FastIron SuperX family | Call |
| SX-DCPWR-SYS | DC Power Supply for the FastIron SuperX family | Call |
| SX-ACPWR-POE | 90-240 VAC power supply for the FastIron SuperX family | Call |
| SX-DCPWR-POE | DC POE power supply for the FastIron SuperX family | Call |
| SX-ACPWR2500-POE | FSX 2500W 220V POE PS for the FastIron SuperX family | Call |
| SX-PCAUS | Australian Power Cord for the FastIron SuperX family | Call |
| 00700-551 | Right Angle Power Cord, 10A 125V, NEMA 5-15P (plug) to IEC 60320-C13 Connector. | Call |
FastIron SuperX/SX Family Options and Accessories
| Part Number | Description | MSRP |
|---|---|---|
| SX-FIL3U | Full Layer 3 IPv4 Upgrade Kit for the FastIron SuperX/SX family. Software includes advanced Layer 2 and full Layer 3 IPv4 services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM-SM and PIM-DM). | Call |
| SX-FIL3U-6-IPV4 | Full Layer 3 IPv4 Upgrade Kit for the IPv6-ready management modules for the FastIron SuperX/SX family. Software includes advanced Layer 2 and Full Layer 3 IPv4 services (BGP-4, OSPF, RIP, VRRP, VRRPE, DVMRP, PIM-SM and PIM-DM). Note: This upgrade kit may only be applied to IPv6-ready management modules and does not enable IPv6 routing. | Call |
| SX-FIL3U-6-IPV6 | Full Layer 3 IPv4+IPv6 upgrade kit for the IPv6-ready management modules for the FastIron SuperX/SX family. This software upgrade adds support for Full Layer 3 IPv6 routing protocols including RIPng, OSPFv3, IPv6 static routes, 6-to-4 static tunneling. This upgrade also includes Full L3 IPv4 services including RIPv1/v2, OSPF, BGP4, PIM-SM, PIM-DM, and DVMRP. Note: This upgrade kit may only be applied to IPv6-ready management modules. | Call |
